LED RGB Strip 150 7.5W/1m IP45
The tape width is 10 mm, and its total power is 7.5W per metre, 37.5W per 5 metres. One tape module has a length of 10 cm and contains 3 LEDs RGB.
The tape can be cut every 10 cm into sections of any length. The led strip has a higher IP45 rating.
RGB so you can freely change the colour and intensity of emitted light.
Depending on the selected controller, you can also set different lighting programs such as flashing, smooth colour diffusion or stroboscope.
Controllers are available in our shop.
Presented LED strip has a total luminous flux of 1100 lumen and is suitable for typical decorative lighting. It can be used as ceiling lighting or decoration of RTV zones.
LED strips are a modern and practical method of lighting and decorating rooms and furniture. The strips are flexible and have a self-adhesive backing, making them easy to install on any flat surface.
LED strip is powered by a safe voltage of 12VDC and therefore requires the use of an LED power supply.
When choosing a power supply, it's best to buy one with 10% power reserve.
IMPORTANT NOTICE:
Please note that the images of the product shown above are for illustrative purposes only.
While we strive to provide accurate representations, there might be slight differences between the product image and the actual product you receive. These variations could be due to lighting, individual screen settings, product enhancements, or minor design updates from the manufacturer.
We assure you that any discrepancies are minimal and will not affect the overall quality and functionality of the product.
If you have any questions or concerns, please feel free to contact our customer support team for further assistance at support@batsol.co.uk or phone us at 01752 656270.
At Batteries and Solar, your satisfaction is our top priority, and we are committed to providing the best shopping experience for you.
Thank you for choosing Batteries and Solar for your purchase.
