Victron Energy Peak Power Pack 12.8V/40Ah - 512Wh   PPP012040000

The Victron Energy Peak 12.8V 40Ah Power Pack is a complete substitute for heavy lead acid batteries in applications where high currents occur for short time. Being primarily meant for caravan movers, it is equipped with a built-in charger allowing charging from the vehicle electrical system whilst travelling with the caravan. This way the pack will be fully charged upon arrival to the camping site. If necessary, the charging is possible using the supplied adapter via a grid outlet. Charging from a solar panel is also possible.

Important Notice:

Please note that the images of the product shown above are for illustrative purposes only.

While we strive to provide accurate representations, there might be slight differences between the product image and the actual product you receive. These variations could be due to lighting, individual screen settings, product enhancements, or minor design updates from the manufacturer.

We assure you that any discrepancies are minimal and will not affect the overall quality and functionality of the product.

If you have any questions or concerns, please feel free to contact our customer support team for further assistance at support@batsol.co.uk or phone us at 01752 656270.

At Batteries and Solar, your satisfaction is our top priority, and we are committed to providing the best shopping experience for you.

Thank you for choosing Batteries and Solar for your purchase.

Key Features 

Lightweight and easy to install
– Ideal for mobile applications.

Effective protection against improper use
– Ideal for solar power and other applications where excessive discharge might quickly cause damage to lead acid batteries.

Storage mode
– Reduces power consumption to almost zero. Prevents damage due to excessive discharge of the battery during storage.

Remote control with status indicator

– Push button (supplied) with a dual-colour LED status indicator:

• Short push of the button: high capacity output activated for 30 minutes (mover applications), red LED
• Hold down for 2 seconds: high capacity output always activated, slow flashing red LED.
• Hold down for 5 seconds: storage mode, blue LED flashes 10 times
• Battery is charged via input 1: slow flashing blue LED
• Battery fully charged: blue LED
• Overload or overheating: flashing red LED

VE.Direct port: can be connected to a PC or smartphone
(VE.Direct to USB or VE.Direct Bluetooth Smart dongle required)

Operation:

• Output 1: on / 30-minute timer / off
• Output 2: on/off
• Input 1: on/off

Monitoring:

• Battery voltage
• Temperature and alarms

Specifications

Attachments 

Datasheet

Product Manual